| Customization: | Available |
|---|---|
| Capacity: | 200---15000L |
| Material: | Stainless Steel Material 304 and 316 |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| CH-MT-500L/1000L Hydraulic Vacuum Emulsifying Homogenizing High Class Cosmetics Producing Equipment | |||
| No | Item | Description | |
| 1 | Stirring way | A. up mixing mode: 3.5KW/each Single leaf oar Frame mixing and fixed oar Speed:0-63r/pm with speed frequency controller B. Homogenize speed 3600RPM power:11KW/each |
|
| 2 | Operation | Under normal pressure | |
| 3 | Discharge way | Stainless steel underflow butterfly valve | |
| 4 | TEM show type | TEM controller | |
| 5 | Opening way | By manual | |
| 6 | Cold and heat type | Steam or thermal heaters heating, Running water cooling down | |
| 7 | Main Technique | Design Volume: 650L Capacity: 500L | |
| Design Volume: 1250L Capacity: 1000L | |||
| 8 | Material | Three jackets: Inner layer : SUS 316 2mm Middle layer: SUS304 4mm Out layer : SUS 304 4mm Jackets pressure: 0.25MPa |
|
| 9 | Pressure show type | Pressure Gage | |
| 10 | Polishing | 300 mesh( the pot and other part outside) | |
| 11 | Voltage | 220V/380V 50HZ 3 phases | |
| 12 | Electric Appliance | Fully digital control | |
| 13 | Weld | Fully automatic welding, no dead corner | |
| 14 | Platform | SUS 304 frame, and the surface of platform is aluminum material. Two tanks amount in the work plat form together with ladder And all the work platform will be covered by stainless steel material |
|
| 15 | Control system | Manual with electronic control case.material is SUS304 | |
| 16 | Homogenize seal type | Mechanical seal | |
| 17 | Dimension | Dia1430*H1000mm(customized) | |
| 18 | Gross.Weight | 1500KG | |
After Sales Service
The above machine which we supply it to you, we can give you one years after sales warranty, we can also send our engineer to you factory to install this equipment and train your staff, but the Buyer should pay the round air ticket cost and arrange the hotel accommodation as well as the means for Seller's engineer. We will send some free set of spare parts for you change it.
Payment terms:
30% deposit by T/T before production, 70% balance should be paid by T/T before shipment. but we also accept L/C.
Package:
Standard wooden Case Packing
Shipment terms:
We usually take FOB, but we can also accept EXW,CIF,CNF.
Company Info
){kind=link}